Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Furniture Workshop Paint Stripping for Cabinets Doors Tables Fiber Laser Cleaning Machine

Spu:
1601987214946

About Product

Highlight

High-Power 200W: Removes rust efficiently with minimal material damage. Versatile Compatibility: Works on aluminum, brass, carbon steel, and copper. Fast Cleaning Speed: Cleans up to 15-30 m² per hour. Compact Design: Portable for use both at home and on the go. Durable Construction: Built with high-quality aluminum and brass.

Product Details

Four metals in one pass is the reason buyers ask for this machine. These four metals do not absorb a beam the same way: steel takes the energy readily, while aluminum and copper reflect a large part of it and brass sits somewhere in between. A 200W pulsed source at the right pulse length still puts enough energy into the surface to lift rust, oxide or paint without melting the parent metal. That tuning is what makes a laser cleaning machine useful in a mixed shop: the same laser cleaning machine behaves differently on copper than on steel.
The same head does two jobs. On a cleaning setting the pulse is short and peaks high, so surface contamination vaporises while the substrate stays cool. On a marking setting the energy spreads more evenly and turns the surface layer of steel to a stable oxide, or anneals stainless without changing its surface. A 200W laser cleaning machine therefore replaces both a bench grinder for light rust and a separate marking handpiece for serial numbers and etchings, which matters in a small workshop where one piece of equipment covers many small jobs.
Fifteen to thirty square metres an hour describes light rust and oxide on clean, flat stock. The number slides down as soon as the surface curves, the part has to be repositioned, or the coating is thick. The head is light enough to carry to a tank, a gate or a restoration bench, while the controller stays on its trolley. A laser cleaning machine at 200W is not the fastest way to clear an open yard, but it is a laser cleaning machine you can actually take to the work.
Keep expectations honest. Mirror-finish aluminum and polished copper can show a matte patch if the settings are wrong, deep pitting needs mechanical cleaning first, and thin sheet can distort if the pulse repeats in one spot. The fix is the same every time: start at low power on a sample, walk up until the contamination lifts cleanly, and stop there. A laser cleaning machine only outperforms a hand scraper when the setting is matched to the metal in front of it.
Scene image

About Us

Wuhan Maohe Tianyu Laser Equipment Co., Ltd., with 15 years of experience, specializes in laser marking and processing solutions. The company offers 200W handheld pulsed laser engraving machines compatible with aluminum, brass, carbon steel, and copper. With a focus on industrial manufacturing, it provides advanced laser welding, cutting, and engraving technologies, supported by robust quality control and international market presence.
What a mixed-material buyer usually asks next is about support. Lenses, seals and the calibration files for each metal are held as spares, and enquiries are answered around the clock. The 200W laser cleaning machine can be built to a non-standard voltage or scan length, standard units ship in four to six weeks, regional partners can hold an exclusive territory, and CE documentation travels with every laser cleaning machine.

FAQs

Q1. Why does this 200W laser cleaning machine work on aluminum and copper?
Because the pulse length is tuned to absorption, not fixed. Steel takes the beam readily; aluminum and copper reflect a large part of it, so a short, high-peak pulse still deposits enough energy to lift rust or oxide without melting the surface.
Q2. Can a laser cleaning machine mark as well as clean?
Yes. Cleaning uses short, high-peak pulses; marking uses a more even energy spread to oxidise steel or anneal stainless. The same laser cleaning machine head switches between jobs from the controller.
Q3. Will this laser cleaning machine discolor aluminum or brass?
It can if the setting is too hot. On the right pulse, the layer lifts and the bright metal comes back. Test on a scrap corner first, especially on anodised or polished stock.
Q4. Is the 15-30 m²/h figure of this laser cleaning machine realistic on thin sheet?
On light rust over clean flat stock, yes. Curved parts, thick scale and repeated repositioning pull it down. Time a small area on your own metal and use that number for planning.
Q5. How does a laser cleaning machine differ between carbon steel and stainless?
Carbon steel takes the beam directly; stainless reflects more and benefits from a slower pass to avoid heat tint. The controller holds a profile for each, so settings stay repeatable.
Q6. What maintenance does a 200W laser cleaning machine need?
Wipe the protective lens, check the connector and the airflow, and empty the extraction. Lenses and filters are the consumables; there is no grit, solvent or nozzle to replace.
Q7. Does this laser cleaning machine need extraction and eyewear?
Yes, both. Cleaning produces dust and, on coated parts, fumes that should be captured at the nozzle. Operators also need eyewear rated for the wavelength and a marked work zone.
Q8. How portable is this laser cleaning machine really?
The laser cleaning machine head and cable are carried by hand to the work; the controller stays on its trolley. It suits a workshop bench, a restoration job or a site visit, rather than climbing ladders all day.
Q9. What is the delivery time?
A standard 200W laser cleaning machine ships in four to six weeks from confirmed order; non-standard voltage or scan length adds time. Sample tests run in parallel, so the setting is settled before the build starts.
Q10. Can I send my own metals for a test?
Send aluminum, brass, steel or copper samples with the rust, oxide or paint you need removed. They return cleaned with the settings recorded, so the laser cleaning machine you order rests on a result you have seen.

A1. What can a laser cleaning machine remove?

Laser cleaning can remove rust, oxides, paint and selected coatings from suitable surfaces. Results depend on the base material, layer composition and thickness. Share photos and material details to help identify a suitable cleaning process.


A2. Will laser cleaning damage the surface underneath?

Correctly selected laser parameters can remove unwanted layers while limiting changes to the substrate. Damage-free results are not automatic. Sensitive surfaces, thin parts and unfamiliar coatings should be tested against your required finish before production.


A3. Should I choose a pulsed or continuous-wave laser cleaner?

Pulsed systems provide flexible control of energy delivery for selective cleaning. Continuous-wave systems may suit robust surfaces that tolerate more heat input. Choose based on the substrate, coating, required finish and tested productivity—not wattage alone.


A4. How fast can this machine remove rust or paint?

Cleaning speed varies with coating thickness, adhesion, surface geometry and the required cleanliness. Compare results using the same material and finish criteria. A useful test records cleaned area, processing time, settings and any additional passes.


A5. Is laser cleaning better than sandblasting or chemical cleaning?

Laser cleaning can target specific areas without abrasive media or chemical cleaning agents. It is worth evaluating where selective removal and reduced cleanup matter. Sandblasting or chemical processes may remain more economical for some large-area or complex applications.


A6. What are the running costs of a laser cleaner?

Include electricity, extraction filters, protective optics, cooling-system maintenance, labor and residue disposal. Laser cleaning avoids blasting media, but the complete system still needs maintenance. Compare cost per cleaned part or square meter at your required finish.


A7. Do I need fume extraction and a dedicated work area?

Cleaning releases particles and may release hazardous substances from coatings. Suitable extraction and filtration are needed for the application. Open high-power systems also require a controlled laser area, appropriate shielding, trained operators and correctly selected protective equipment.


A8. What information is needed to select a laser cleaning machine?

Provide the base material, contaminant or coating, approximate layer thickness, part dimensions, daily workload and required finish. Photos and representative samples help assess whether the priority is selective removal, surface preservation or higher throughput.

 

Handheld Laser Welding Machine

B1. What metals can a handheld laser welder weld?

Suitable systems can weld stainless steel, mild steel, aluminum and other selected metals. Compatibility depends on alloy, thickness, surface condition and joint design. Dissimilar-metal combinations need individual assessment; one successful combination does not validate all alloys.


B2. What thickness can this laser welder weld reliably?

Reliable welding thickness depends on the material, joint type, fit-up, laser power and required penetration. A maximum-thickness claim alone is not enough. Provide your joint drawing and acceptance requirements to establish a suitable production range.


B3. How does laser welding compare with TIG or MIG welding?

For suitable joints, laser welding can increase travel speed and reduce distortion and finishing work. The benefit varies with fit-up, material and quality requirements. Compare total time per accepted part, including preparation, welding, inspection and rework.


B4. Is a handheld laser welder easy for beginners to learn?

Basic operation can be easier to learn than some conventional welding techniques, but consistent weld quality still requires practice and suitable parameters. Laser-safety training and an approved work area are essential before operation. Easy handling does not replace process qualification.


B5. Do I need shielding gas and filler wire?

Shielding gas is normally used to protect the weld; the gas must suit the material and process. Some close-fitting joints can be welded without filler. Other joints benefit from a compatible wire feeder and filler material, where supported.


B6. Can laser welding reduce grinding and improve weld appearance?

With suitable fit-up and parameters, laser welding can produce narrow, consistent seams and reduce finishing work. Final appearance depends on material, cleanliness, gas protection and operator technique. Confirm results against your own visual and mechanical acceptance criteria.


B7. What safety measures does handheld laser welding require?

Open high-power laser welding requires a controlled work area, suitable barriers or enclosure, extraction and application-specific protective equipment. Reflected beams also present hazards. Ordinary welding protection alone is insufficient; follow the machine instructions and a qualified site safety assessment.


B8. What is the real operating cost of a laser welder?

Budget for shielding gas, electricity, protective lenses, nozzles, cooling maintenance and filler wire where used. Include labor and post-weld finishing. Compare cost per accepted weld rather than laser power or machine price alone.

 

Laser Marking Machine

C1. Which laser marker should I choose: fiber, MOPA, UV or CO₂?

Fiber lasers are widely used for metals and selected plastics. MOPA fiber systems add pulse-width control for specific marking effects. UV and CO₂ suit different materials and finishes. Select the source by testing your actual substrate and required mark.


C2. Are laser markings permanent and resistant to wear?

Laser marking changes or removes material rather than applying ordinary printing ink. Durability depends on the marking method, depth, substrate and service environment. For parts exposed to abrasion, chemicals or heat, specify the relevant durability tests before approval.


C3. Can the machine mark logos, serial numbers, barcodes and QR codes?

These are common laser-marking applications, but supported formats and variable-data functions depend on the controller and software. For traceability codes, assess contrast, size and readability with the intended scanner or verifier—not appearance alone.


C4. Do I need a MOPA laser for color or black marking?

MOPA pulse control can help achieve specific color effects on stainless steel and black marks on anodized aluminum. Results depend on alloy, finish and parameters. It is not full-color printing, and not every marking task requires MOPA.


C5. Can it mark rings, tubes and curved parts?

Suitable rotary fixtures can support cylindrical parts, while some shaped surfaces require 3D focusing or dedicated positioning. Confirm part dimensions, weight, geometry and marking location. A rotary attachment alone does not make every curved surface suitable.


C6. How do laser power and marking area affect the result?

Required power depends on material, cycle time and marking depth. Lens choice affects the available field and achievable spot characteristics. Higher wattage or a larger field does not automatically produce finer marks; evaluate both against your artwork and part.


C7. How fast can it mark each part?

Cycle time depends on artwork size, fill density, depth, material and loading method. Advertised scanning speed is not the same as finished-part throughput. Assess a complete cycle that includes positioning, marking, unloading and any required code verification.


C8. Can it connect to my production line or business software?

Integration depends on the selected controller, software license and available interfaces. Define triggers, variable-data sources, part tracking and error handling before purchase. Conveyor marking, database connections and custom software should be confirmed as specific configuration items.

 

Fiber Laser Cutting Machine

D1. What metals and thicknesses can this fiber laser cutter cut?

Fiber laser cutters can process common metals such as mild steel, stainless steel and aluminum, with suitable configurations. Thickness capacity depends on the model, material and assist gas. Use a model-specific cutting chart and distinguish production-quality cutting from maximum severance.


D2. How much laser power do I need for my workshop?

Choose power around your most frequent materials, thicknesses, order volume and required edge quality. Higher power may improve productivity on suitable jobs, but should be evaluated alongside gas supply, loading time, electrical capacity and total investment.


D3. Will the cut edges need deburring or further finishing?

Well-matched parameters can produce clean edges, but dross, oxidation and roughness depend on material, thickness, gas and part geometry. Define your acceptable edge quality and downstream process. Do not assume every part will be ready without finishing.


D4. What are the main operating costs of a fiber laser cutter?

Key costs include assist gas, electricity, nozzles, protective windows, cooling, extraction, maintenance and labor. Material utilization also matters. Compare cost per finished part using representative drawings and local gas and electricity prices.


D5. Should I use oxygen, nitrogen or compressed air for cutting?

Gas selection affects edge oxidation, speed and cost. Oxygen is common for mild steel; nitrogen is often selected where an oxide-free edge is required. Compressed air suits some applications. Confirm approved gas quality, pressure and capacity for the specific machine and material.


D6. Can one machine cut both sheet metal and tubes?

Only a machine configured for both applications can do this. Tube cutting requires suitable workholding, supports and software. Confirm tube shapes, dimensions, loading limits and usable lengths; a sheet-cutting machine does not automatically include tube-cutting capability.


D7. What installation requirements should I prepare?

Prepare the required floor space, access route, foundation where specified, electrical supply, assist gas, cooling and extraction. Requirements vary by configuration. Request the installation layout and utility specifications for the exact machine before arranging your workshop.


D8. Is the machine suitable for operators new to CNC laser cutting?

Software guidance and validated cutting data can simplify operation, but operators still need training in setup, nesting, material handling, cut-quality checks and maintenance. Confirm the supplied software, training scope and technical support before selecting a configuration.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
product furniture workshop paint stripping for cabinets doors tables fiber laser cleaning machine-0