Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Heritage Ornament Cleaning for Sculptures Frames Relics Portable Laser Cleaning Machine

Spu:
1601987246905

About Product

Highlight

Shipyard & Marine: a laser cleaning machine removes rust and old coating on hulls, decks and tanks without grit containment.
Steel Structure & Bridges: a laser cleaning machine cleans rust before recoating, leaving the profile intact for coating adhesion.
Mold & Tooling: cleans release agent and flash from injection molds without abrasion or damage.
Automotive Aftermarket: cleans weld seams and underbody parts before coating or repair.
Heritage & Restoration: cleans delicate metal artifacts without contact abrasion or chemical baths.

Product Details

In a shipyard, a laser cleaning machine takes on the jobs that used to need blasting crews and containment tents. Hull sides, deck plates and tank interiors come clean of rust and old coating, and the lack of grit means no waste stream to dispose of after the job. On large structures, the 100-2000 W range matches the scale: a pulsed 200 W unit touches up brackets and fittings, while a 2000 W CW laser cleaning machine clears broad plate at coating-ready speed.

For steel structures and bridges, the laser cleaning machine solves the recoating problem. Rust and loose paint come off, but the sound profile stays, which is what the next coating needs. There is no dust cloud to contain on a bridge deck and no containment tent to rig, so a maintenance crew on a laser cleaning machine can work a span in the time a blasting crew spends setting up.

Molds and tooling are where a 200W pulsed laser cleaning machine earns its keep. Release agent, flash and light contamination lift off without touching the tool steel, and the pulsed mode keeps the surface cool enough that mold texture and parting lines survive. A sandblaster would round the edges; a chemical bath would attack the finish. The laser cleaning machine sits between those two.

Automotive aftermarket and heritage restoration round out the range. A laser cleaning machine on weld seams prepares the surface before coating without grinding the bead down, and on heritage metal it removes corrosion and old paint layers on artifacts that cannot take contact abrasion. Each application on a laser cleaning machine takes its own recipe, and the controller stores it so the next job starts from the saved setting rather than from zero.
Detail shotDetail shot

About Us

Wuhan Maohe Tianyu Laser Equipment Co., Ltd.is the leading manufacturer of quality industrial marking equipment With 15 years factory experience. Focused on the development and production of various types of laser marking machine, co2 laser marking machine and jewelry spot welding machine. Personalized products and services to provide customers with a significant advantage.By reason of reliable performance of our machine and cost effective price, they are widely used in electronics components, Apparatus and meter, Hardware tools, Mechanical parts ,Digital elecronic ,Jewelry and Daily necessities Certificate and international certification As CE certified industrial laser marking, welding machine and dot pin marking machine manufacturer. Our purpose is Via quality and service to satisfy customer and guarantee the customer benefit maximization and provide customers with the most cost-effective laser solutions.As the pioneer of Chinese laser industrial processing equipment ,we have mature market ,professional working system to service customers
Company overviewCompetitive advantagesCompetitive advantagesFactory profile

FAQs

What power level is required? Pulsed or continuous wave (CW)?

100200 W for light rust; 300 500 W pulsed or 1500 W CW for moderate rust/paint; 2000 W CW for heavy-duty industrial applications.

Will it damage the substrate (metal surface)?

There is virtually no damage when using the correct parameters. The laser is preferentially absorbed by rust or paint, while clean metal reflects most of the energy. Pulse mode is safer and suitable for precision molds and thin sheets. Excessive power or prolonged exposure can lead to overheating. Testing with samples is recommended.

How long is the warranty period? How is international after-sales service handled?

2 years for the laser source, 1 year for the complete machine (excluding man-made damage).

Can you send samples for testing? Customization is supported.

Supports free or low cost sample testing.

Which industries use a laser cleaning machine?

Shipyards, steel structures, mold shops, automotive aftermarket and heritage restoration. Each industry takes its own recipe, stored in the controller so the next job starts from the saved setting.

Can it clean ship hulls or large steel structures?

Yes. A 2000W CW laser cleaning machine clears broad plate at coating-ready speed, while a pulsed 200W laser cleaning machine touches up brackets and fittings on the same site.

Is it safe for molds and tooling?

Yes, when pulsed. A 200W pulsed laser cleaning machine lifts release agent and flash without rounding edges or attacking mold texture, which sandblasting would do.

Can it clean weld seams before coating?

Yes. A laser cleaning machine removes heat tint and spatter from a weld seam without grinding the bead down, so the surface is ready for coating.

Can it restore heritage metal artifacts?

On delicate objects, yes. The pulsed mode removes corrosion and old paint without contact abrasion, but each artifact needs a test pass because the laser cleaning machine works on metal, not on stone or ceramic.

How does it handle oil and grease on parts?

A laser cleaning machine vaporises light oil and film, but heavy grease should be wiped first. The controller stores the recipe for a laser cleaning machine on oily parts so the setting is repeatable.

A1. What can a laser cleaning machine remove?

Laser cleaning can remove rust, oxides, paint and selected coatings from suitable surfaces. Results depend on the base material, layer composition and thickness. Share photos and material details to help identify a suitable cleaning process.


A2. Will laser cleaning damage the surface underneath?

Correctly selected laser parameters can remove unwanted layers while limiting changes to the substrate. Damage-free results are not automatic. Sensitive surfaces, thin parts and unfamiliar coatings should be tested against your required finish before production.


A3. Should I choose a pulsed or continuous-wave laser cleaner?

Pulsed systems provide flexible control of energy delivery for selective cleaning. Continuous-wave systems may suit robust surfaces that tolerate more heat input. Choose based on the substrate, coating, required finish and tested productivity—not wattage alone.


A4. How fast can this machine remove rust or paint?

Cleaning speed varies with coating thickness, adhesion, surface geometry and the required cleanliness. Compare results using the same material and finish criteria. A useful test records cleaned area, processing time, settings and any additional passes.


A5. Is laser cleaning better than sandblasting or chemical cleaning?

Laser cleaning can target specific areas without abrasive media or chemical cleaning agents. It is worth evaluating where selective removal and reduced cleanup matter. Sandblasting or chemical processes may remain more economical for some large-area or complex applications.


A6. What are the running costs of a laser cleaner?

Include electricity, extraction filters, protective optics, cooling-system maintenance, labor and residue disposal. Laser cleaning avoids blasting media, but the complete system still needs maintenance. Compare cost per cleaned part or square meter at your required finish.


A7. Do I need fume extraction and a dedicated work area?

Cleaning releases particles and may release hazardous substances from coatings. Suitable extraction and filtration are needed for the application. Open high-power systems also require a controlled laser area, appropriate shielding, trained operators and correctly selected protective equipment.


A8. What information is needed to select a laser cleaning machine?

Provide the base material, contaminant or coating, approximate layer thickness, part dimensions, daily workload and required finish. Photos and representative samples help assess whether the priority is selective removal, surface preservation or higher throughput.

 

Handheld Laser Welding Machine

B1. What metals can a handheld laser welder weld?

Suitable systems can weld stainless steel, mild steel, aluminum and other selected metals. Compatibility depends on alloy, thickness, surface condition and joint design. Dissimilar-metal combinations need individual assessment; one successful combination does not validate all alloys.


B2. What thickness can this laser welder weld reliably?

Reliable welding thickness depends on the material, joint type, fit-up, laser power and required penetration. A maximum-thickness claim alone is not enough. Provide your joint drawing and acceptance requirements to establish a suitable production range.


B3. How does laser welding compare with TIG or MIG welding?

For suitable joints, laser welding can increase travel speed and reduce distortion and finishing work. The benefit varies with fit-up, material and quality requirements. Compare total time per accepted part, including preparation, welding, inspection and rework.


B4. Is a handheld laser welder easy for beginners to learn?

Basic operation can be easier to learn than some conventional welding techniques, but consistent weld quality still requires practice and suitable parameters. Laser-safety training and an approved work area are essential before operation. Easy handling does not replace process qualification.


B5. Do I need shielding gas and filler wire?

Shielding gas is normally used to protect the weld; the gas must suit the material and process. Some close-fitting joints can be welded without filler. Other joints benefit from a compatible wire feeder and filler material, where supported.


B6. Can laser welding reduce grinding and improve weld appearance?

With suitable fit-up and parameters, laser welding can produce narrow, consistent seams and reduce finishing work. Final appearance depends on material, cleanliness, gas protection and operator technique. Confirm results against your own visual and mechanical acceptance criteria.


B7. What safety measures does handheld laser welding require?

Open high-power laser welding requires a controlled work area, suitable barriers or enclosure, extraction and application-specific protective equipment. Reflected beams also present hazards. Ordinary welding protection alone is insufficient; follow the machine instructions and a qualified site safety assessment.


B8. What is the real operating cost of a laser welder?

Budget for shielding gas, electricity, protective lenses, nozzles, cooling maintenance and filler wire where used. Include labor and post-weld finishing. Compare cost per accepted weld rather than laser power or machine price alone.

 

Laser Marking Machine

C1. Which laser marker should I choose: fiber, MOPA, UV or CO₂?

Fiber lasers are widely used for metals and selected plastics. MOPA fiber systems add pulse-width control for specific marking effects. UV and CO₂ suit different materials and finishes. Select the source by testing your actual substrate and required mark.


C2. Are laser markings permanent and resistant to wear?

Laser marking changes or removes material rather than applying ordinary printing ink. Durability depends on the marking method, depth, substrate and service environment. For parts exposed to abrasion, chemicals or heat, specify the relevant durability tests before approval.


C3. Can the machine mark logos, serial numbers, barcodes and QR codes?

These are common laser-marking applications, but supported formats and variable-data functions depend on the controller and software. For traceability codes, assess contrast, size and readability with the intended scanner or verifier—not appearance alone.


C4. Do I need a MOPA laser for color or black marking?

MOPA pulse control can help achieve specific color effects on stainless steel and black marks on anodized aluminum. Results depend on alloy, finish and parameters. It is not full-color printing, and not every marking task requires MOPA.


C5. Can it mark rings, tubes and curved parts?

Suitable rotary fixtures can support cylindrical parts, while some shaped surfaces require 3D focusing or dedicated positioning. Confirm part dimensions, weight, geometry and marking location. A rotary attachment alone does not make every curved surface suitable.


C6. How do laser power and marking area affect the result?

Required power depends on material, cycle time and marking depth. Lens choice affects the available field and achievable spot characteristics. Higher wattage or a larger field does not automatically produce finer marks; evaluate both against your artwork and part.


C7. How fast can it mark each part?

Cycle time depends on artwork size, fill density, depth, material and loading method. Advertised scanning speed is not the same as finished-part throughput. Assess a complete cycle that includes positioning, marking, unloading and any required code verification.


C8. Can it connect to my production line or business software?

Integration depends on the selected controller, software license and available interfaces. Define triggers, variable-data sources, part tracking and error handling before purchase. Conveyor marking, database connections and custom software should be confirmed as specific configuration items.

 

Fiber Laser Cutting Machine

D1. What metals and thicknesses can this fiber laser cutter cut?

Fiber laser cutters can process common metals such as mild steel, stainless steel and aluminum, with suitable configurations. Thickness capacity depends on the model, material and assist gas. Use a model-specific cutting chart and distinguish production-quality cutting from maximum severance.


D2. How much laser power do I need for my workshop?

Choose power around your most frequent materials, thicknesses, order volume and required edge quality. Higher power may improve productivity on suitable jobs, but should be evaluated alongside gas supply, loading time, electrical capacity and total investment.


D3. Will the cut edges need deburring or further finishing?

Well-matched parameters can produce clean edges, but dross, oxidation and roughness depend on material, thickness, gas and part geometry. Define your acceptable edge quality and downstream process. Do not assume every part will be ready without finishing.


D4. What are the main operating costs of a fiber laser cutter?

Key costs include assist gas, electricity, nozzles, protective windows, cooling, extraction, maintenance and labor. Material utilization also matters. Compare cost per finished part using representative drawings and local gas and electricity prices.


D5. Should I use oxygen, nitrogen or compressed air for cutting?

Gas selection affects edge oxidation, speed and cost. Oxygen is common for mild steel; nitrogen is often selected where an oxide-free edge is required. Compressed air suits some applications. Confirm approved gas quality, pressure and capacity for the specific machine and material.


D6. Can one machine cut both sheet metal and tubes?

Only a machine configured for both applications can do this. Tube cutting requires suitable workholding, supports and software. Confirm tube shapes, dimensions, loading limits and usable lengths; a sheet-cutting machine does not automatically include tube-cutting capability.


D7. What installation requirements should I prepare?

Prepare the required floor space, access route, foundation where specified, electrical supply, assist gas, cooling and extraction. Requirements vary by configuration. Request the installation layout and utility specifications for the exact machine before arranging your workshop.


D8. Is the machine suitable for operators new to CNC laser cutting?

Software guidance and validated cutting data can simplify operation, but operators still need training in setup, nesting, material handling, cut-quality checks and maintenance. Confirm the supplied software, training scope and technical support before selecting a configuration.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
product heritage ornament cleaning for sculptures frames relics portable laser cleaning machine-0