Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Antique Furniture Refinishing for Carved Wood Metal Armor Veneer Surface Pulsed Laser Cleaning Machine

Spu:
1601988620443

About Product

Highlight

100-2000 W Range: a laser cleaning machine matches light rust to heavy industrial work on one platform.
Pulsed & CW Modes: pulsed for precision on thin sheets and molds, CW for broad area on plate.
Adjustable Scan Width: 100-200 mm working width on the handheld head.
Recipe Storage: power, speed and frequency saved per material, recalled from the controller.
Air & Water Cooling: 100-500 W air-cooled, 1500-2000 W water-cooled for continuous duty.

Product Details

A spec sheet on a laser cleaning machine reads differently from most industrial equipment. The first number on a laser cleaning machine spec sheet is power, but power alone does not tell you the job. A 200W pulsed unit lifts light rust and passivation on brackets and fittings; a 500W pulsed unit takes on moderate rust and paint on mid-size parts; a 1500W CW laser cleaning machine moves broad plate fast, and a 2000W CW unit is for heavy-duty industrial scale. The range is one platform, not four machines, so a buyer starts with the sample and the matching laser cleaning machine wattage rather than guessing.

Pulsed and continuous wave are the two columns a buyer must understand. On a pulsed laser cleaning machine, the laser fires in short bursts, and the peak power inside each burst is high while the average power over a second is lower. That is why the pulsed laser cleaning machine works on thin sheets and molds: the coating absorbs the pulse, the substrate reflects the rest, and there is time between bursts for heat to leave. CW on a laser cleaning machine runs steady, which is faster on broad rust and thick paint but less forgiving on thin metal.

Scan width and cleaning speed are the next two numbers. A laser cleaning machine with a 100-200 mm scan width covers a swath as the head moves, and the stated speed of 5-15 m²/h depends on the coating, not just the wattage. Light rust on a clean plate runs at the upper end of the range; thick paint on rough steel runs lower. The recipe on the laser cleaning machine stores the combination of scan width, speed and power that the sample proved, so the operator on a laser cleaning machine does not re-tune on the shop floor.

Cooling is the last line on the spec sheet, and it decides duty cycle. A 100-500W laser cleaning machine runs air-cooled, which keeps the head light and the site simple. A 1500-2000W unit runs water-cooled because the average power is high and the chiller carries the heat away for shifts. The controller logs hours on the laser cleaning machine, which feeds the maintenance schedule rather than the operator guessing. Send the sample, read the spec sheet against the result, and the matching laser cleaning machine is clear.
Detail shot

About Us

Wuhan Maohe Tianyu Laser Equipment Co., Ltd.is the leading manufacturer of quality industrial marking equipment With 15 years factory experience. Focused on the development and production of various types of laser marking machine, co2 laser marking machine and jewelry spot welding machine. Personalized products and services to provide customers with a significant advantage.By reason of reliable performance of our machine and cost effective price, they are widely used in electronics components, Apparatus and meter, Hardware tools, Mechanical parts ,Digital elecronic ,Jewelry and Daily necessities Certificate and international certification As CE certified industrial laser marking, welding machine and dot pin marking machine manufacturer. Our purpose is Via quality and service to satisfy customer and guarantee the customer benefit maximization and provide customers with the most cost-effective laser solutions.As the pioneer of Chinese laser industrial processing equipment ,we have mature market ,professional working system to service customers
Company overviewCompetitive advantagesCompetitive advantagesFactory profile

FAQs

What power level is required? Pulsed or continuous wave (CW)?

100200 W for light rust; 300 500 W pulsed or 1500 W CW for moderate rust/paint; 2000 W CW for heavy-duty industrial applications.

Will it damage the substrate (metal surface)?

There is virtually no damage when using the correct parameters. The laser is preferentially absorbed by rust or paint, while clean metal reflects most of the energy. Pulse mode is safer and suitable for precision molds and thin sheets. Excessive power or prolonged exposure can lead to overheating. Testing with samples is recommended.

How long is the warranty period? How is international after-sales service handled?

2 years for the laser source, 1 year for the complete machine (excluding man-made damage).

Can you send samples for testing? Customization is supported.

Supports free or low cost sample testing.

What does "pulsed" mean on a spec sheet?

The laser fires in short bursts. On a pulsed laser cleaning machine, peak power inside each burst is high while average power over a second is lower, which is why pulsed works on thin sheets and molds.

What is the difference between peak power and average power?

Peak power is the instant energy in one pulse; average power is the energy spread over a second. A pulsed laser cleaning machine can have high peak power for coating removal while staying gentle on the substrate.

What does scan width tell me?

Scan width is the swath the head covers in one pass. A laser cleaning machine with 100-200 mm scan width covers a band as it moves, and the setting is stored in the recipe per material.

How is cleaning speed measured?

In square meters per hour on a laser cleaning machine, but the number depends on the coating. Light rust on clean plate runs at 15 m²/h; thick paint on rough steel runs lower.

Air-cooled vs water-cooled, which do I need?

A 100-500W laser cleaning machine is air-cooled and light; a 1500-2000W unit is water-cooled for continuous shift work. The chiller carries the heat away on the higher-wattage models.

How do I read the recipe settings?

The controller stores power, speed and frequency per material on the laser cleaning machine. The operator recalls the recipe from the test rather than re-tuning on the shop floor.

A1. What can a laser cleaning machine remove?

Laser cleaning can remove rust, oxides, paint and selected coatings from suitable surfaces. Results depend on the base material, layer composition and thickness. Share photos and material details to help identify a suitable cleaning process.


A2. Will laser cleaning damage the surface underneath?

Correctly selected laser parameters can remove unwanted layers while limiting changes to the substrate. Damage-free results are not automatic. Sensitive surfaces, thin parts and unfamiliar coatings should be tested against your required finish before production.


A3. Should I choose a pulsed or continuous-wave laser cleaner?

Pulsed systems provide flexible control of energy delivery for selective cleaning. Continuous-wave systems may suit robust surfaces that tolerate more heat input. Choose based on the substrate, coating, required finish and tested productivity—not wattage alone.


A4. How fast can this machine remove rust or paint?

Cleaning speed varies with coating thickness, adhesion, surface geometry and the required cleanliness. Compare results using the same material and finish criteria. A useful test records cleaned area, processing time, settings and any additional passes.


A5. Is laser cleaning better than sandblasting or chemical cleaning?

Laser cleaning can target specific areas without abrasive media or chemical cleaning agents. It is worth evaluating where selective removal and reduced cleanup matter. Sandblasting or chemical processes may remain more economical for some large-area or complex applications.


A6. What are the running costs of a laser cleaner?

Include electricity, extraction filters, protective optics, cooling-system maintenance, labor and residue disposal. Laser cleaning avoids blasting media, but the complete system still needs maintenance. Compare cost per cleaned part or square meter at your required finish.


A7. Do I need fume extraction and a dedicated work area?

Cleaning releases particles and may release hazardous substances from coatings. Suitable extraction and filtration are needed for the application. Open high-power systems also require a controlled laser area, appropriate shielding, trained operators and correctly selected protective equipment.


A8. What information is needed to select a laser cleaning machine?

Provide the base material, contaminant or coating, approximate layer thickness, part dimensions, daily workload and required finish. Photos and representative samples help assess whether the priority is selective removal, surface preservation or higher throughput.

 

Handheld Laser Welding Machine

B1. What metals can a handheld laser welder weld?

Suitable systems can weld stainless steel, mild steel, aluminum and other selected metals. Compatibility depends on alloy, thickness, surface condition and joint design. Dissimilar-metal combinations need individual assessment; one successful combination does not validate all alloys.


B2. What thickness can this laser welder weld reliably?

Reliable welding thickness depends on the material, joint type, fit-up, laser power and required penetration. A maximum-thickness claim alone is not enough. Provide your joint drawing and acceptance requirements to establish a suitable production range.


B3. How does laser welding compare with TIG or MIG welding?

For suitable joints, laser welding can increase travel speed and reduce distortion and finishing work. The benefit varies with fit-up, material and quality requirements. Compare total time per accepted part, including preparation, welding, inspection and rework.


B4. Is a handheld laser welder easy for beginners to learn?

Basic operation can be easier to learn than some conventional welding techniques, but consistent weld quality still requires practice and suitable parameters. Laser-safety training and an approved work area are essential before operation. Easy handling does not replace process qualification.


B5. Do I need shielding gas and filler wire?

Shielding gas is normally used to protect the weld; the gas must suit the material and process. Some close-fitting joints can be welded without filler. Other joints benefit from a compatible wire feeder and filler material, where supported.


B6. Can laser welding reduce grinding and improve weld appearance?

With suitable fit-up and parameters, laser welding can produce narrow, consistent seams and reduce finishing work. Final appearance depends on material, cleanliness, gas protection and operator technique. Confirm results against your own visual and mechanical acceptance criteria.


B7. What safety measures does handheld laser welding require?

Open high-power laser welding requires a controlled work area, suitable barriers or enclosure, extraction and application-specific protective equipment. Reflected beams also present hazards. Ordinary welding protection alone is insufficient; follow the machine instructions and a qualified site safety assessment.


B8. What is the real operating cost of a laser welder?

Budget for shielding gas, electricity, protective lenses, nozzles, cooling maintenance and filler wire where used. Include labor and post-weld finishing. Compare cost per accepted weld rather than laser power or machine price alone.

 

C1. Which laser marker should I choose: fiber, MOPA, UV or CO₂?

Fiber lasers are widely used for metals and selected plastics. MOPA fiber systems add pulse-width control for specific marking effects. UV and CO₂ suit different materials and finishes. Select the source by testing your actual substrate and required mark.


C2. Are laser markings permanent and resistant to wear?

Laser marking changes or removes material rather than applying ordinary printing ink. Durability depends on the marking method, depth, substrate and service environment. For parts exposed to abrasion, chemicals or heat, specify the relevant durability tests before approval.


C3. Can the machine mark logos, serial numbers, barcodes and QR codes?

These are common laser-marking applications, but supported formats and variable-data functions depend on the controller and software. For traceability codes, assess contrast, size and readability with the intended scanner or verifier—not appearance alone.


C4. Do I need a MOPA laser for color or black marking?

MOPA pulse control can help achieve specific color effects on stainless steel and black marks on anodized aluminum. Results depend on alloy, finish and parameters. It is not full-color printing, and not every marking task requires MOPA.


C5. Can it mark rings, tubes and curved parts?

Suitable rotary fixtures can support cylindrical parts, while some shaped surfaces require 3D focusing or dedicated positioning. Confirm part dimensions, weight, geometry and marking location. A rotary attachment alone does not make every curved surface suitable.


C6. How do laser power and marking area affect the result?

Required power depends on material, cycle time and marking depth. Lens choice affects the available field and achievable spot characteristics. Higher wattage or a larger field does not automatically produce finer marks; evaluate both against your artwork and part.


C7. How fast can it mark each part?

Cycle time depends on artwork size, fill density, depth, material and loading method. Advertised scanning speed is not the same as finished-part throughput. Assess a complete cycle that includes positioning, marking, unloading and any required code verification.


C8. Can it connect to my production line or business software?

Integration depends on the selected controller, software license and available interfaces. Define triggers, variable-data sources, part tracking and error handling before purchase. Conveyor marking, database connections and custom software should be confirmed as specific configuration items.

 

Fiber Laser Cutting Machine

D1. What metals and thicknesses can this fiber laser cutter cut?

Fiber laser cutters can process common metals such as mild steel, stainless steel and aluminum, with suitable configurations. Thickness capacity depends on the model, material and assist gas. Use a model-specific cutting chart and distinguish production-quality cutting from maximum severance.


D2. How much laser power do I need for my workshop?

Choose power around your most frequent materials, thicknesses, order volume and required edge quality. Higher power may improve productivity on suitable jobs, but should be evaluated alongside gas supply, loading time, electrical capacity and total investment.


D3. Will the cut edges need deburring or further finishing?

Well-matched parameters can produce clean edges, but dross, oxidation and roughness depend on material, thickness, gas and part geometry. Define your acceptable edge quality and downstream process. Do not assume every part will be ready without finishing.


D4. What are the main operating costs of a fiber laser cutter?

Key costs include assist gas, electricity, nozzles, protective windows, cooling, extraction, maintenance and labor. Material utilization also matters. Compare cost per finished part using representative drawings and local gas and electricity prices.


D5. Should I use oxygen, nitrogen or compressed air for cutting?

Gas selection affects edge oxidation, speed and cost. Oxygen is common for mild steel; nitrogen is often selected where an oxide-free edge is required. Compressed air suits some applications. Confirm approved gas quality, pressure and capacity for the specific machine and material.


D6. Can one machine cut both sheet metal and tubes?

Only a machine configured for both applications can do this. Tube cutting requires suitable workholding, supports and software. Confirm tube shapes, dimensions, loading limits and usable lengths; a sheet-cutting machine does not automatically include tube-cutting capability.


D7. What installation requirements should I prepare?

Prepare the required floor space, access route, foundation where specified, electrical supply, assist gas, cooling and extraction. Requirements vary by configuration. Request the installation layout and utility specifications for the exact machine before arranging your workshop.


D8. Is the machine suitable for operators new to CNC laser cutting?

Software guidance and validated cutting data can simplify operation, but operators still need training in setup, nesting, material handling, cut-quality checks and maintenance. Confirm the supplied software, training scope and technical support before selecting a configuration.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
product antique furniture refinishing for carved wood metal armor veneer surface pulsed laser cleaning machine-0