Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

500W Continuous Wave Fiber Laser Cleaning Machine for Heavy Rust Removal on Metal

Spu:
1601914056452

About Product

Highlight

500W Continuous Wave Power: Efficiently removes heavy rust from metal surfaces. Non-Destructive Cleaning: Safely cleans delicate materials like Brass and Aluminum. High Efficiency: Cleans up to 30 square meters per hour, saving time. Eco-Friendly Design: Reduces environmental impact while cleaning. Trolley Design: Easy to transport and use in various settings.

Product Details

A 500W continuous-wave laser cleaning machine sits between a 200W pulsed bench unit and a 2000W production line, and the trolley puts that middle weight on wheels rather than on a cart you carry. The laser cleaning machine is built for heavy rust on carbon steel and copper parts, where the 15-30 m²/h figure comes from real shop-floor work, not from a flat sample. The continuous beam holds a steady rate through a shift, and the head stays at 500W instead of dropping off as a pulsed unit would on thick scale.

Brass and aluminum are the test case. A laser cleaning machine on these metals works because the rust, oxide or paint layer is darker than the base and absorbs the beam first. The setting has to be matched to the alloy: brass reflects more than steel, and aluminum heat-tints quickly, so the accepted parameter is lower than on a carbon-steel plate. A short sample pass on the laser cleaning machine tells you the number before the job starts.

The trolley is not decoration. A 500W laser cleaning machine plus chiller and cable is a heavy set, and putting it on wheels with a handle means one operator can move it between a welding bay, a plating line and a repair shop without a forklift. The cable reel, power inlet and water fill sit at the handle end, so the laser cleaning machine is ready to run in minutes rather than after a rigging session.

Choose CW when the job is heavy scale, thick paint or continuous production, and choose pulsed when the part is thin, polished or heat-sensitive. This laser cleaning machine is the CW answer for workshops that need more than a handheld pulsed unit but do not yet run a 2000W cell. Voltage, scan width and fiber length can be configured to the site, and CE documentation ships with every laser cleaning machine.
Scene image

About Us

Wuhan Maohe Tianyu Laser Equipment Co., Ltd. is a foreign-invested enterprise with 15 years of experience, specializing in laser marking, welding, cutting, and engraving solutions. The company offers 500W continuous wave fiber laser machines for heavy rust removal on metals like carbon steel and copper, with a cleaning speed of 15-30 m²/h. It provides comprehensive laser technology services, leveraging advanced domestic and international innovations.
Company overview

FAQs

Why a 500W continuous-wave laser cleaning machine rather than a pulsed head?

CW holds a steady beam through a shift, which suits heavy scale and thick paint. Pulsed heads are better for thin or polished parts where heat distortion matters. A 500W CW laser cleaning machine covers both a workshop bay and a mid-size production line without the cost of a 2000W cell.

Can it really clean brass and aluminum without damaging the surface?

On the right setting, rust and oxide absorb the beam while clean brass or aluminum reflects the beam. The parameter is lower than on carbon steel, and a sample pass is recommended before production. Too much heat on aluminum will heat-tint the surface.

What is the realistic cleaning speed on site?

The 15-30 m²/h figure is for light to moderate rust on flat steel. Heavy scale, vertical surfaces or thin parts slow the rate. A laser cleaning machine on a real job averages closer to the lower end of that range.

How does the trolley work in different workshops?

The unit, chiller and cable sit on a wheeled frame with a handle. One operator moves the laser cleaning machine between welding, plating and repair bays, and the power inlet and water fill are at the handle end, so setup takes minutes.

Does a 500W laser cleaning machine need water cooling?

Yes. The chiller on the trolley keeps the head at rated power through a full shift. It uses clean water, and the filter and water level are checked as part of routine maintenance.

What consumables does it use?

Lenses, filters and occasionally seals for a laser cleaning machine. There is no grit, solvent or blasting nozzle to replace, which is the running-cost difference from abrasive methods.

Can the same laser cleaning machine switch between cleaning and marking?

Cleaning uses short, high-peak pulses to lift a layer; marking uses an even energy spread to oxidize or anneal the surface. On a standard laser cleaning machine the head switches from the controller, but confirm the optics at order time.

Is fume extraction required on site?

Yes. A laser cleaning machine produces dust and, on painted parts, fumes that should be captured at the nozzle. Operators also need wavelength-rated eyewear and a marked work zone.

What is the warranty and overseas support?

The laser source carries a one-year warranty. A laser cleaning machine comes with online video diagnostics respond within 24 hours, replacement parts ship by DHL or FedEx, and lifetime video guidance covers complex issues.

Can I test my own parts before ordering?

Yes. Send coated or rusted samples, and they return cleaned with the recorded settings, so the laser cleaning machine you order rests on a result you have seen. Standard builds ship in four to six weeks.

A1. What can a laser cleaning machine remove?

Laser cleaning can remove rust, oxides, paint and selected coatings from suitable surfaces. Results depend on the base material, layer composition and thickness. Share photos and material details to help identify a suitable cleaning process.


A2. Will laser cleaning damage the surface underneath?

Correctly selected laser parameters can remove unwanted layers while limiting changes to the substrate. Damage-free results are not automatic. Sensitive surfaces, thin parts and unfamiliar coatings should be tested against your required finish before production.


A3. Should I choose a pulsed or continuous-wave laser cleaner?

Pulsed systems provide flexible control of energy delivery for selective cleaning. Continuous-wave systems may suit robust surfaces that tolerate more heat input. Choose based on the substrate, coating, required finish and tested productivity—not wattage alone.


A4. How fast can this machine remove rust or paint?

Cleaning speed varies with coating thickness, adhesion, surface geometry and the required cleanliness. Compare results using the same material and finish criteria. A useful test records cleaned area, processing time, settings and any additional passes.


A5. Is laser cleaning better than sandblasting or chemical cleaning?

Laser cleaning can target specific areas without abrasive media or chemical cleaning agents. It is worth evaluating where selective removal and reduced cleanup matter. Sandblasting or chemical processes may remain more economical for some large-area or complex applications.


A6. What are the running costs of a laser cleaner?

Include electricity, extraction filters, protective optics, cooling-system maintenance, labor and residue disposal. Laser cleaning avoids blasting media, but the complete system still needs maintenance. Compare cost per cleaned part or square meter at your required finish.


A7. Do I need fume extraction and a dedicated work area?

Cleaning releases particles and may release hazardous substances from coatings. Suitable extraction and filtration are needed for the application. Open high-power systems also require a controlled laser area, appropriate shielding, trained operators and correctly selected protective equipment.


A8. What information is needed to select a laser cleaning machine?

Provide the base material, contaminant or coating, approximate layer thickness, part dimensions, daily workload and required finish. Photos and representative samples help assess whether the priority is selective removal, surface preservation or higher throughput.

 

Handheld Laser Welding Machine

B1. What metals can a handheld laser welder weld?

Suitable systems can weld stainless steel, mild steel, aluminum and other selected metals. Compatibility depends on alloy, thickness, surface condition and joint design. Dissimilar-metal combinations need individual assessment; one successful combination does not validate all alloys.


B2. What thickness can this laser welder weld reliably?

Reliable welding thickness depends on the material, joint type, fit-up, laser power and required penetration. A maximum-thickness claim alone is not enough. Provide your joint drawing and acceptance requirements to establish a suitable production range.


B3. How does laser welding compare with TIG or MIG welding?

For suitable joints, laser welding can increase travel speed and reduce distortion and finishing work. The benefit varies with fit-up, material and quality requirements. Compare total time per accepted part, including preparation, welding, inspection and rework.


B4. Is a handheld laser welder easy for beginners to learn?

Basic operation can be easier to learn than some conventional welding techniques, but consistent weld quality still requires practice and suitable parameters. Laser-safety training and an approved work area are essential before operation. Easy handling does not replace process qualification.


B5. Do I need shielding gas and filler wire?

Shielding gas is normally used to protect the weld; the gas must suit the material and process. Some close-fitting joints can be welded without filler. Other joints benefit from a compatible wire feeder and filler material, where supported.


B6. Can laser welding reduce grinding and improve weld appearance?

With suitable fit-up and parameters, laser welding can produce narrow, consistent seams and reduce finishing work. Final appearance depends on material, cleanliness, gas protection and operator technique. Confirm results against your own visual and mechanical acceptance criteria.


B7. What safety measures does handheld laser welding require?

Open high-power laser welding requires a controlled work area, suitable barriers or enclosure, extraction and application-specific protective equipment. Reflected beams also present hazards. Ordinary welding protection alone is insufficient; follow the machine instructions and a qualified site safety assessment.


B8. What is the real operating cost of a laser welder?

Budget for shielding gas, electricity, protective lenses, nozzles, cooling maintenance and filler wire where used. Include labor and post-weld finishing. Compare cost per accepted weld rather than laser power or machine price alone.

 

Laser Marking Machine

C1. Which laser marker should I choose: fiber, MOPA, UV or CO₂?

Fiber lasers are widely used for metals and selected plastics. MOPA fiber systems add pulse-width control for specific marking effects. UV and CO₂ suit different materials and finishes. Select the source by testing your actual substrate and required mark.


C2. Are laser markings permanent and resistant to wear?

Laser marking changes or removes material rather than applying ordinary printing ink. Durability depends on the marking method, depth, substrate and service environment. For parts exposed to abrasion, chemicals or heat, specify the relevant durability tests before approval.


C3. Can the machine mark logos, serial numbers, barcodes and QR codes?

These are common laser-marking applications, but supported formats and variable-data functions depend on the controller and software. For traceability codes, assess contrast, size and readability with the intended scanner or verifier—not appearance alone.


C4. Do I need a MOPA laser for color or black marking?

MOPA pulse control can help achieve specific color effects on stainless steel and black marks on anodized aluminum. Results depend on alloy, finish and parameters. It is not full-color printing, and not every marking task requires MOPA.


C5. Can it mark rings, tubes and curved parts?

Suitable rotary fixtures can support cylindrical parts, while some shaped surfaces require 3D focusing or dedicated positioning. Confirm part dimensions, weight, geometry and marking location. A rotary attachment alone does not make every curved surface suitable.


C6. How do laser power and marking area affect the result?

Required power depends on material, cycle time and marking depth. Lens choice affects the available field and achievable spot characteristics. Higher wattage or a larger field does not automatically produce finer marks; evaluate both against your artwork and part.


C7. How fast can it mark each part?

Cycle time depends on artwork size, fill density, depth, material and loading method. Advertised scanning speed is not the same as finished-part throughput. Assess a complete cycle that includes positioning, marking, unloading and any required code verification.


C8. Can it connect to my production line or business software?

Integration depends on the selected controller, software license and available interfaces. Define triggers, variable-data sources, part tracking and error handling before purchase. Conveyor marking, database connections and custom software should be confirmed as specific configuration items.

 

Fiber Laser Cutting Machine

D1. What metals and thicknesses can this fiber laser cutter cut?

Fiber laser cutters can process common metals such as mild steel, stainless steel and aluminum, with suitable configurations. Thickness capacity depends on the model, material and assist gas. Use a model-specific cutting chart and distinguish production-quality cutting from maximum severance.


D2. How much laser power do I need for my workshop?

Choose power around your most frequent materials, thicknesses, order volume and required edge quality. Higher power may improve productivity on suitable jobs, but should be evaluated alongside gas supply, loading time, electrical capacity and total investment.


D3. Will the cut edges need deburring or further finishing?

Well-matched parameters can produce clean edges, but dross, oxidation and roughness depend on material, thickness, gas and part geometry. Define your acceptable edge quality and downstream process. Do not assume every part will be ready without finishing.


D4. What are the main operating costs of a fiber laser cutter?

Key costs include assist gas, electricity, nozzles, protective windows, cooling, extraction, maintenance and labor. Material utilization also matters. Compare cost per finished part using representative drawings and local gas and electricity prices.


D5. Should I use oxygen, nitrogen or compressed air for cutting?

Gas selection affects edge oxidation, speed and cost. Oxygen is common for mild steel; nitrogen is often selected where an oxide-free edge is required. Compressed air suits some applications. Confirm approved gas quality, pressure and capacity for the specific machine and material.


D6. Can one machine cut both sheet metal and tubes?

Only a machine configured for both applications can do this. Tube cutting requires suitable workholding, supports and software. Confirm tube shapes, dimensions, loading limits and usable lengths; a sheet-cutting machine does not automatically include tube-cutting capability.


D7. What installation requirements should I prepare?

Prepare the required floor space, access route, foundation where specified, electrical supply, assist gas, cooling and extraction. Requirements vary by configuration. Request the installation layout and utility specifications for the exact machine before arranging your workshop.


D8. Is the machine suitable for operators new to CNC laser cutting?

Software guidance and validated cutting data can simplify operation, but operators still need training in setup, nesting, material handling, cut-quality checks and maintenance. Confirm the supplied software, training scope and technical support before selecting a configuration.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
product 500w continuous wave fiber laser cleaning machine for heavy rust removal on metal-0