Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

1000W-2000W High Power Laser Rust Cleaning Machine for Heavy Industry Metal Parts

Spu:
1601913004099

About Product

Highlight

High Power Laser: Delivers intense cleaning for heavy industrial use. Rust Removal: Effectively cleans metal parts up to 30 m²/h. Wide Range Power: Select between 1000W and 2000W for optimal performance. Durable Construction: Built with carbon steel for long-lasting reliability. Efficient Cooling: Equipped with water cooling system for continuous operation.

Product Details

The beam does the stripping, not an abrasive or a chemical. A 1000W or 2000W pulsed source feeds a scan head, and the fouling layer—rust, mill scale, thick paint, oxide—absorbs the energy and comes off, while the steel beneath reflects much of what reaches it. No grit, no acid rinse, no abrasive dust in the air. A laser cleaning machine leaves it dry and ready for the next operation.
A 1000W laser cleaning machine covers light to medium rust, mill scale and paint on parts of moderate size. The 2000W model is aimed at heavier scale and large flat panels where the pass has to keep pace with a line. Water cooling keeps either size usable for a full shift: the head keeps rated power instead of fading as it warms, so a laser cleaning machine in continuous production keeps its rate from the first hour to the last.
Thirty square metres an hour is a ceiling a laser cleaning machine can reach on a single-sided pass over light work, with a wide scan and no repositioning. Pitting, cured epoxy, edges and vertical faces pull it down, so plan a shift by timing a square metre on your part. The carbon steel frame belongs here too: it carries a 2000W source and the cooling circuit without flexing, survives a crane move and holds alignment under floor vibration. The trade is that a laser cleaning machine built this way stays put, so the parts come to the unit.
Power has limits. Thin sheet distorts when energy is spread badly, polished and anodised surfaces can pick up a tint, and tight-tolerance parts are better served by a smaller head and a slower pass. A laser cleaning machine of this class is the wrong purchase when the day's work is a handful of small parts. Match the platform to the throughput, test on scrap, and record what was accepted.
Scene image

About Us

Wuhan Maohe Tianyu Laser Equipment Co., Ltd., with 15 years of experience, specializes in laser technology solutions for industrial manufacturing. The company offers high-power laser machines, including 1000W-2000W rust cleaning systems, with carbon steel construction and water cooling for durability. It provides laser marking, welding, cutting, and engraving solutions, leveraging advanced technology and partnerships with Optical Valley Laser.
Service follows from that volume. With roughly 8,000 units a year going to about 35,000 customers in more than 140 countries, lenses, filters and cooling parts are held as spares and support runs around the clock. A laser cleaning machine at this level can be built to a non-standard voltage or focal length instead of being declined, standard builds are quoted at four to six weeks, and regional partners can hold an exclusive territory. CE documentation ships with every laser cleaning machine.
Company overview

FAQs

Q1. What does this laser cleaning machine take off?
Rust, mill scale, weld oxide and heat tint, paint and powder coating, mould release agent, oil films, salt from sea freight, graffiti. The layer must absorb the beam better than the base metal does.
Q2. Will a 2000W laser cleaning machine damage the steel underneath?
Not when the settings match the part. The beam stops at the substrate and the steel keeps its profile. Thin sheet, polished faces and unfamiliar coatings need a test pass, and the accepted finish should be written down.
Q3. Which laser cleaning machine should I choose, 1000W or 2000W?
Start from the layer and the area. Light to medium work on moderate parts sits with 1000W; heavier scale and big panels need 2000W to hold speed. Where the two look close, test both on one workpiece.
Q4. Is the 30 m²/h rating of this laser cleaning machine realistic?
That is a ceiling for any laser cleaning machine, not an average. A wide scan over clean light work can reach it; pitting and awkward geometry pull the figure down. Time one square metre yourself and scale from there.
Q5. Why water cooling instead of air on a high-power laser cleaning machine?
Water carries heat away faster, so the head holds rated power through a full shift instead of losing power as it heats. The circuit needs clean water, a chiller and a routine check, and that is what keeps a laser cleaning machine at its rate.
Q6. What routine upkeep does a 2000W laser cleaning machine involve?
Wipe the protective lens, check the cooling water flow and temperature, inspect the fiber connector, and clear the extraction. Lenses and filters are the consumables; no grit, solvent or nozzle to replace.
Q7. Can it work in line with a robot or a conveyor?
Yes. A fixed head and a repeatable stand-off make a laser cleaning machine a candidate for a cell, and the scan pattern can be programmed for a known part. Fixture, extraction and safety interlock belong in the line design.
Q8. What site services does this laser cleaning machine need?
Power, extraction capacity and floor space have to be confirmed before the unit is specified; it draws far more than a handheld model. The cell also needs a marked zone, rated eyewear and trained operators.
Q9. What is the delivery time?
A standard laser cleaning machine ships in four to six weeks from confirmed order; custom voltage or focal length adds to that. Sample testing runs in parallel, so the specification is settled before the unit enters the queue.
Q10. Can I send samples before ordering?
Send a few representative pieces, coated and finished as they come off your line. They return cleaned with the working settings recorded, so the laser cleaning machine you order rests on a result you have seen.

A1. What can a laser cleaning machine remove?

Laser cleaning can remove rust, oxides, paint and selected coatings from suitable surfaces. Results depend on the base material, layer composition and thickness. Share photos and material details to help identify a suitable cleaning process.


A2. Will laser cleaning damage the surface underneath?

Correctly selected laser parameters can remove unwanted layers while limiting changes to the substrate. Damage-free results are not automatic. Sensitive surfaces, thin parts and unfamiliar coatings should be tested against your required finish before production.


A3. Should I choose a pulsed or continuous-wave laser cleaner?

Pulsed systems provide flexible control of energy delivery for selective cleaning. Continuous-wave systems may suit robust surfaces that tolerate more heat input. Choose based on the substrate, coating, required finish and tested productivity—not wattage alone.


A4. How fast can this machine remove rust or paint?

Cleaning speed varies with coating thickness, adhesion, surface geometry and the required cleanliness. Compare results using the same material and finish criteria. A useful test records cleaned area, processing time, settings and any additional passes.


A5. Is laser cleaning better than sandblasting or chemical cleaning?

Laser cleaning can target specific areas without abrasive media or chemical cleaning agents. It is worth evaluating where selective removal and reduced cleanup matter. Sandblasting or chemical processes may remain more economical for some large-area or complex applications.


A6. What are the running costs of a laser cleaner?

Include electricity, extraction filters, protective optics, cooling-system maintenance, labor and residue disposal. Laser cleaning avoids blasting media, but the complete system still needs maintenance. Compare cost per cleaned part or square meter at your required finish.


A7. Do I need fume extraction and a dedicated work area?

Cleaning releases particles and may release hazardous substances from coatings. Suitable extraction and filtration are needed for the application. Open high-power systems also require a controlled laser area, appropriate shielding, trained operators and correctly selected protective equipment.


A8. What information is needed to select a laser cleaning machine?

Provide the base material, contaminant or coating, approximate layer thickness, part dimensions, daily workload and required finish. Photos and representative samples help assess whether the priority is selective removal, surface preservation or higher throughput.

 

Handheld Laser Welding Machine

B1. What metals can a handheld laser welder weld?

Suitable systems can weld stainless steel, mild steel, aluminum and other selected metals. Compatibility depends on alloy, thickness, surface condition and joint design. Dissimilar-metal combinations need individual assessment; one successful combination does not validate all alloys.


B2. What thickness can this laser welder weld reliably?

Reliable welding thickness depends on the material, joint type, fit-up, laser power and required penetration. A maximum-thickness claim alone is not enough. Provide your joint drawing and acceptance requirements to establish a suitable production range.


B3. How does laser welding compare with TIG or MIG welding?

For suitable joints, laser welding can increase travel speed and reduce distortion and finishing work. The benefit varies with fit-up, material and quality requirements. Compare total time per accepted part, including preparation, welding, inspection and rework.


B4. Is a handheld laser welder easy for beginners to learn?

Basic operation can be easier to learn than some conventional welding techniques, but consistent weld quality still requires practice and suitable parameters. Laser-safety training and an approved work area are essential before operation. Easy handling does not replace process qualification.


B5. Do I need shielding gas and filler wire?

Shielding gas is normally used to protect the weld; the gas must suit the material and process. Some close-fitting joints can be welded without filler. Other joints benefit from a compatible wire feeder and filler material, where supported.


B6. Can laser welding reduce grinding and improve weld appearance?

With suitable fit-up and parameters, laser welding can produce narrow, consistent seams and reduce finishing work. Final appearance depends on material, cleanliness, gas protection and operator technique. Confirm results against your own visual and mechanical acceptance criteria.


B7. What safety measures does handheld laser welding require?

Open high-power laser welding requires a controlled work area, suitable barriers or enclosure, extraction and application-specific protective equipment. Reflected beams also present hazards. Ordinary welding protection alone is insufficient; follow the machine instructions and a qualified site safety assessment.


B8. What is the real operating cost of a laser welder?

Budget for shielding gas, electricity, protective lenses, nozzles, cooling maintenance and filler wire where used. Include labor and post-weld finishing. Compare cost per accepted weld rather than laser power or machine price alone.

 

Laser Marking Machine

C1. Which laser marker should I choose: fiber, MOPA, UV or CO₂?

Fiber lasers are widely used for metals and selected plastics. MOPA fiber systems add pulse-width control for specific marking effects. UV and CO₂ suit different materials and finishes. Select the source by testing your actual substrate and required mark.


C2. Are laser markings permanent and resistant to wear?

Laser marking changes or removes material rather than applying ordinary printing ink. Durability depends on the marking method, depth, substrate and service environment. For parts exposed to abrasion, chemicals or heat, specify the relevant durability tests before approval.


C3. Can the machine mark logos, serial numbers, barcodes and QR codes?

These are common laser-marking applications, but supported formats and variable-data functions depend on the controller and software. For traceability codes, assess contrast, size and readability with the intended scanner or verifier—not appearance alone.


C4. Do I need a MOPA laser for color or black marking?

MOPA pulse control can help achieve specific color effects on stainless steel and black marks on anodized aluminum. Results depend on alloy, finish and parameters. It is not full-color printing, and not every marking task requires MOPA.


C5. Can it mark rings, tubes and curved parts?

Suitable rotary fixtures can support cylindrical parts, while some shaped surfaces require 3D focusing or dedicated positioning. Confirm part dimensions, weight, geometry and marking location. A rotary attachment alone does not make every curved surface suitable.


C6. How do laser power and marking area affect the result?

Required power depends on material, cycle time and marking depth. Lens choice affects the available field and achievable spot characteristics. Higher wattage or a larger field does not automatically produce finer marks; evaluate both against your artwork and part.


C7. How fast can it mark each part?

Cycle time depends on artwork size, fill density, depth, material and loading method. Advertised scanning speed is not the same as finished-part throughput. Assess a complete cycle that includes positioning, marking, unloading and any required code verification.


C8. Can it connect to my production line or business software?

Integration depends on the selected controller, software license and available interfaces. Define triggers, variable-data sources, part tracking and error handling before purchase. Conveyor marking, database connections and custom software should be confirmed as specific configuration items.

 

Fiber Laser Cutting Machine

D1. What metals and thicknesses can this fiber laser cutter cut?

Fiber laser cutters can process common metals such as mild steel, stainless steel and aluminum, with suitable configurations. Thickness capacity depends on the model, material and assist gas. Use a model-specific cutting chart and distinguish production-quality cutting from maximum severance.


D2. How much laser power do I need for my workshop?

Choose power around your most frequent materials, thicknesses, order volume and required edge quality. Higher power may improve productivity on suitable jobs, but should be evaluated alongside gas supply, loading time, electrical capacity and total investment.


D3. Will the cut edges need deburring or further finishing?

Well-matched parameters can produce clean edges, but dross, oxidation and roughness depend on material, thickness, gas and part geometry. Define your acceptable edge quality and downstream process. Do not assume every part will be ready without finishing.


D4. What are the main operating costs of a fiber laser cutter?

Key costs include assist gas, electricity, nozzles, protective windows, cooling, extraction, maintenance and labor. Material utilization also matters. Compare cost per finished part using representative drawings and local gas and electricity prices.


D5. Should I use oxygen, nitrogen or compressed air for cutting?

Gas selection affects edge oxidation, speed and cost. Oxygen is common for mild steel; nitrogen is often selected where an oxide-free edge is required. Compressed air suits some applications. Confirm approved gas quality, pressure and capacity for the specific machine and material.


D6. Can one machine cut both sheet metal and tubes?

Only a machine configured for both applications can do this. Tube cutting requires suitable workholding, supports and software. Confirm tube shapes, dimensions, loading limits and usable lengths; a sheet-cutting machine does not automatically include tube-cutting capability.


D7. What installation requirements should I prepare?

Prepare the required floor space, access route, foundation where specified, electrical supply, assist gas, cooling and extraction. Requirements vary by configuration. Request the installation layout and utility specifications for the exact machine before arranging your workshop.


D8. Is the machine suitable for operators new to CNC laser cutting?

Software guidance and validated cutting data can simplify operation, but operators still need training in setup, nesting, material handling, cut-quality checks and maintenance. Confirm the supplied software, training scope and technical support before selecting a configuration.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
product 1000w 2000w high power laser rust cleaning machine for heavy industry metal parts-0